Prototype PCB Assembly Services

From prototype to series production – one manufacturing partner, consistent quality, and a seamless transition.

Prototype PCB Assembly

Prototype PCB Assembly Services at Steiner Elektronik

At Steiner Elektronik, we support prototype PCB assembly with flexible production planning and material sourcing options. Prototype builds may involve different board revisions, component changes or small quantities, so we adapt our production planning to the specific requirements of each project.

If components are obsolete, difficult to source or subject to allocation, we can highlight potential supply risks and suggest alternatives where possible. Our prototypes are manufactured on the same production lines used for series production, supporting continuity when moving to larger quantities.

Prototype PCB Assembly

When Do You Need Prototype PCB Assembly?

Prototype PCB assembly is an important step in developing and preparing electronic products for series production. It allows customers to test assembled boards, verify functionality and identify potential issues before committing to larger production quantities.

Our prototype PCB assembly services support companies that need to:

  • Validate a New Product: Build and test initial PCB assemblies before series production.
  • Verify Design Changes: Check revised boards or component changes before releasing them for production.
  • Support for Small-Volume Production: We also support engineering companies and businesses that require small production batches rather than large-scale series manufacturing.

  • Prepare for Series Production: Manufacture initial batches on the same production lines used for series manufacturing.
  • Build Small Quantities: Obtain assembled PCBs for internal testing, customer evaluation, or field trials.
  • Test Functionality and Performance: Evaluate assembled boards under the intended operating conditions.

Our Prototype PCB Assembly Capabilities

 

  • Full SMT, THT, and manual assembly for prototypes
  • Components down to 0201 (0.4 × 0.2 mm), including BGA and µBGA, on the first build
  • SPI, 3D AOI, and X-ray inspection for prototypes, not just series production
  • The same JUKI SMT lines, Koh Young SPI/AOI, Nordson X-ray, and REINHARDT ICT equipment used for series production
  • ICT and functional testing, where applicable
  • PCB and component sourcing based on your BOM, including specialty substrates (aluminum, flex, rigid-flex, and high-Tg)
  • Full barcode-based traceability for prototypes
  • ESD-controlled production
Prototype PCB Assembly

What Makes Prototype PCB Assembly Different

Prototype production requires flexibility, short lead times and the ability to adapt as a product develops. At Steiner Elektronik, we support this process with flexible production planning, material sourcing options and the same manufacturing environment used for series production.

  • Short Lead Times: We aim to manufacture prototypes quickly, helping you move forward with testing and product development.
  • Flexible Material Sourcing: You can provide the PCBs and components for prototype assembly or discuss sourcing options with us.
  • Adaptability to Design Changes: Prototype builds may involve design revisions, component changes, or adjustments between runs. We take these requirements into account when planning production.

Testing and Quality Control for Prototype PCB Assembly

Prototype PCB assemblies are subject to the same quality standards and quality management systems as series production. This ensures a consistent approach to quality from the initial prototype through to volume manufacturing.

Depending on the product requirements, inspection and testing may include SPI, 3D AOI, X-ray inspection, ICT, functional testing and visual inspection. The appropriate combination is selected according to the specific assembly and its intended application.

Our production is certified according to ISO 9001 and ISO 14001. We apply IPC-A-610 Class 2 acceptance criteria as standard, with Class 3 requirements used for many products. 

Prototype PCB Assembly
Prototype PCB Assembly

From Prototype to Series Production

The main risk of using a prototype-only vendor is that the production setup has to be rebuilt from scratch when the design moves to series. New stencil, new placement program, new inspection setup, new quality systems. Each change introduces additional effort and the risk of inconsistencies when moving to series production.
With us, prototypes are built on the same production lines used for series manufacturing, supporting a smooth transition to larger quantities. Where applicable, existing production programs, inspection procedures and documentation can be reused, helping reduce additional setup work and maintain process continuity. We see prototype assembly as the starting point of a long-term manufacturing partnership, from the first samples to series production. 

Why Choose Steiner Elektronik for Prototype PCB Assembly Services

  • One Manufacturing Partner from Prototype to Series: We produce prototypes and series quantities at the same facility, giving you one point of contact throughout the production process.
  • Flexible Material Sourcing: You can supply the components and PCBs for prototype builds, while we can manage the complete material sourcing for series production.
  • Cost Savings When Moving to Series Production: One-time setup costs are covered during the prototype phase and do not need to be charged again when the existing setup can be reused.
  • Component Availability Support: We flag potential supply risks, including obsolete components, end-of-life parts, and allocation issues, and suggest alternatives where possible.
  • Production Flexibility for Design Revisions: We can accommodate changes between prototype runs, with any necessary adjustments to the production setup.

  • Production Equipment for Prototypes and Series:
    Your prototypes are manufactured on the same SMT lines used for series production, supporting process continuity as quantities increase.
  • Inspection and Testing Capabilities:
    SPI, 3D AOI, X-ray, ICT, and functional testing are available for prototypes, not just for series production.
  • Consistent Quality Standards: Prototypes and series production are manufactured according to the same IPC-A-610 acceptance criteria.
  • 50+ Years of Electronics Manufacturing Experience:
    Our experience supports both prototype builds and volume production.
  • European Manufacturing, German Support:
    We manufacture in Ruse, Bulgaria, with sales and customer support from our German office.

What to Send Us for a Prototype PCB Assembly Quote

To prepare an accurate quote for your PCB prototype assembly, we need your design files, component information, and project requirements. Complete documentation helps us review manufacturing feasibility, material availability, and estimated lead times.

  • Gerber files and drill-hole information
  • BOM (Bill of Materials)
  • Pick-and-place files, if available
  • Number of prototypes required
  • Assembly requirements (SMT, THT, or mixed)
  • Testing and inspection requirements, if known
  • Expected delivery date or project timeline
  • Whether you will supply the PCBs and components or require material sourcing
  • PCB specifications, including board dimensions, layers, and materials

FAQ

What is prototype PCB assembly?

Prototype PCB assembly is the process of assembling a small number of printed circuit boards to test and validate an electronic design before moving to series production. It allows manufacturers to evaluate functionality, identify potential design issues, and make necessary adjustments before producing larger quantities.

How is prototype PCB assembly different from series production?

Prototype PCB assembly focuses on testing, design validation, and flexibility, typically involving small quantities and potential design revisions. Series production focuses on manufacturing larger quantities with optimized processes, consistent quality, and repeatability. At Steiner Elektronik, prototypes and series production can use the same manufacturing equipment and quality standards.

What happens if a component on my BOM is not available?

If a component is unavailable, obsolete, or affected by supply shortages, we inform you and help identify possible alternatives where available. Any component substitutions are discussed with you and require your approval before implementation.

Can my prototype use the same production setup as my future series run?

Yes. At Steiner Elektronik, prototypes can be assembled using the same JUKI SMT production lines and equipment used for series manufacturing. This supports a smoother transition to larger quantities. Where the design and production requirements remain unchanged, existing production programs and setup data may be reused, reducing additional setup time and costs.

Does Steiner Elektronik assemble prototypes with full SMT, THT, and manual assembly?

Yes. We provide SMT (Surface Mount Technology), THT (Through-Hole Technology), and manual PCB assembly for prototype projects. Our capabilities support different component types, including small SMD components, BGA packages, connectors, and components requiring manual placement or soldering.

Do prototypes receive the same inspection as series builds?

Yes. Prototype PCB assemblies follow the same IPC-A-610 acceptance criteria as series production. Depending on project requirements, we can perform Solder Paste Inspection (SPI), 3D Automated Optical Inspection (AOI), X-ray inspection, In-Circuit Testing (ICT), and functional testing. The inspection and testing scope is determined according to the specific prototype design and requirements.

Can Steiner Elektronik source the PCB and components for my prototype?

Yes. We offer flexible material sourcing for prototype PCB assembly. You can supply your own PCBs and components, or we can coordinate PCB procurement and component sourcing based on your Bill of Materials. Our sourcing capabilities also cover specialized PCB materials, including aluminum, flexible, rigid-flex, and high-Tg boards, depending on project requirements.

Get in Touch
Your electronics – our passion

Contact Us

STEINER ELEKTRONIK LTD
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.